2016-05-08 22:30
laminates翻译
层压板
音标读音
英式:[]美式:[]
基本意思
n.层压材料( laminate的名词复数 );叠层，层压
形近的词
变形
例句
- This paper introduces the main models for the fatigue failure study of CFRP laminates.
介绍了CFRP层板疲劳损伤研究方面的主要模型。
- The behaviors and effective factors of laminates under flexural stress are analysed in this paper.
本文分析、讨论了积层板材料，在弯曲应力下的各种性能及影响因素。
- This paper had studied the optimization problem of antisymmetrical fibre-reinforced rectangular laminates with all edges simply-supported.
本文对四边简支的反对称铺设的纤维增强复合材料矩形层板的优化问题进行了研究。
- The ideas and methods on the structure design of composite laminates are put forward.
从合层板的弯曲刚性出发，提出了复合材料层合板的结构设计的思想和方法。
- The buckling behaviour of orthotropic fiber-reinforced composite laminates is analyzed by the boundary element method.
本文用边界元法分析了纤维增强复合材料正交各向异性层合板的屈曲性态。
- Experimental investigation is conducted to understand the compression strength and failure mechanisms of stitched laminates and unstitched laminates.
试验研究了有、无缝纫层合板的压缩强度和破坏机理。
- In composite laminates there are four basic failure modes: matrix cracking, delamination, fiber breakage and debonding.
复合材料层合板中存在四种基本的失效模式，即：基体开裂、分层、纤维断裂及脱粘。
- Finally, the method of strengthening concrete beam bridge with prestressing presoaked CFRP Laminates was probed.
最后，探讨了预应力碳纤维预浸带应用于混凝土梁桥的加固施工方法。
- Double-notch interlaminar shear strength test is an effective testing method used to test the interlaminar shear strength of laminates.
双切口层间剪切强度测试方法是测试层合板复合材料层间剪切强度的一种有效试验方法。
- According the observed destructional forms, analyzes the destructional mechanism of prestressing presoaked CFRP laminates strengthened RC beam.
根据观察到的破坏形式，分析了预应力碳纤维预浸带加固RC梁的破坏机理。
- The basic topcoat material can be embossed and can be applied in combination with other protective topcoats and laminates.
基本面漆材料可压纹，可用于与其他保护性的面漆涂层和层压板相组合。
- The effect of stitching reinforcement on strain concentration was investigated for the composite laminates containing a circular hole.
对复合材料开口缝合补强结构进行了实验研究。
- The characteristics of interlayer metal have effect on the performance of whole laminates.
夹层金属材料本身的性能对叠层材料整体的性能也有一定的影响。
- The prepolymer can be used for making laminates and prepregs by curing the composition to a polymer.
通过将所述组合物固化为聚合物，预聚物可以用于生产层压材料和预浸料。
- Toughening from interlaminar short fibers is one of the effective ways of interlaminar toughening in composite laminates.
层间短纤维强韧化是复合材料层合板层间增韧的有效途径之一。
- The present approach is suitable for mechanical analysis of middle and thick laminates, and has a good convergence.
本文的方法适应于中厚叠层板的力学响应分析问题，并有较好的收敛性。
- Fiber Reinforced Metal Laminates ( FRMLs) are used widely for modern industry with excellent mechanical properties.
纤维增强金属层合板，因其优异的综合性能而广泛应用于现代工业中。
- The results indicate that spring washer can extend the fatigue life of joints of composite laminates by the pre-tightening.
分析表明：弹簧垫圈的预紧作用可延长复合材料层合板螺栓孔处的疲劳寿命；
- The present work is to study the effect of damage on the vibration performance of composite laminates.
本文旨在找出损伤对复合材料层合板振动特性的影响。
- The results show that this analytic method used to solve nonlinear three-dimensional problems for composite laminates is effective.
结果表明，该解析方法对于求解层合板的三维非线性问题是有效的。
- A finite-layer method for aaalysis of angle-ply laminates is presented in this paper.
本文提出了分析角铺设层板的有限层法。
- The three-dimensional exact solution methods for dynamic problems a finitely long piezoelectric composite laminates are studied.
有限长压电层合板结构动态问题的三维精确解研究。
- Effect of curing pressure on voids and mechanical properties of carbon fiber reinforced composite laminates
固化压力对炭纤维复合材料层压板的孔隙和力学性能的影响
- Damage zone sizes of forward position of sharp notch in laminates were estimated by means of WEK fracture model.
借助复合材料的WEK断裂模型估计了层合板在尖切口前沿的损伤区尺寸。
- The paper describes the synthesis of modified diphenyl ether resin and preparation of GRP laminates.
本文介绍了一种改性二苯醚树脂的合成及其玻璃布层压板的制备方法，并对其性能进行了全面测试。
- A thermosetting resin; used chiefly in strong adhesives and coatings and laminates.
一种热硬化性树脂，主要用于强力粘合剂和涂料、绝缘层中。
- The conclusion can be provided as a good reference for the design of the laminates with holes.
本文结论对复合材料层合板优化设计和带孔层合结构的应力计算具有较好的参考价值。
- A three-dimensional non-linear progressive damage model was developed to predict the response of composite laminates with a single bolt.
建立了三维累积损伤有限元模型，采用扩展拉格朗日乘子法对螺栓表面和复合材料层合板孔壁间的接触行为进行了模拟。
- The global vibration identification factors of damaged and damage free laminates are obtained by numerical simulation.
通过数值模拟提取结构无损和不同程度面积分层损伤的全局振动标识量；
- Effects of micro-crack damages on delamination of composite laminates
微裂纹损伤对复合材料层板分层的影响
百科解释
网络意思
层压制品
板
层压板
复合材料