2016-05-05 22:06
nitriding翻译
渗氮
音标读音
英式:['naɪtraɪdɪŋ]美式:['naɪtraɪdɪŋ]
基本意思
v.渗氮
形近的词
变形
例句
- The nitriding layer on Ti-6Al-4V alloy in nitrogen-argon atmosphere by laser radiating was investigated.
对Ti6Al4V合金在氮和氩的混合气体中通过激光加热形成的渗氮层进行了研究。
- Nitriding and oxidation: diffusion layer and oxidation layer improve soldering resistance, adhesion resistance and crack resistance.
氮化扩散层和氧化层：可以提高模具耐溶损性、耐过烧性、耐粘着性和耐热裂性。
- The pre-heat treatment and ion nitriding of H13 steel was studied.
研究了H13钢的预先热处理工艺和离子渗氮工艺。
- Glow discharge nitriding and nitrocarburising in AISI 304 austenitic stainless steel were approached in this paper.
本课题针对AISI304奥氏体不锈钢进行辉光离子渗氮和离子氮碳共渗研究。
- The effect of the atmosphere on the structure and properties of ion nitriding layer of alloy TC4 was investigated.
研究了在不同气氛下进行离子渗氮对TC4钛合金渗氮层的组织与性能的影响。
- Liquid nitriding adds more nitrogen and less carbon than either cyaniding or carburizing in cyanide baths.
液体渗氮时在氰化物溶液中加入比氰化及渗碳都较多的氮和较少的碳。
- Plasma nitriding treatments of 304 austenitic stainless steel were performed at 400 ℃ for different time.
对304奥氏体不锈钢进行400℃不同时间的离子渗氮处理。
- Also, the stainless steel ion nitriding, low carbon steel ion nitriding, nitrogen oxides more prominent role.
另外，对不锈钢离子氮化、低碳钢离子氮化、氧氮化作用更加突出。
- The company's nitriding process is divided into: gas soft-nitriding, MGN and gas rigidity-nitriding.
公司的渗氮工艺分为：气体软氮化、MGN和气体硬氮化。
- This paper introduces the research and development of manufecture technique of high strength nitriding gear used in gearbox.
本文介绍了用于变速器的高强度渗氮齿轮制造技术的开发与研究工作。
- The gas nitriding process control systems are designed to provide a fully automatic operation.
气体氮化过程控制系统的设计，提供了全自动的操作。
- The results show that the plasma nitriding can improve the wear resistance of H13 die steel at high-temperature.
结果显示：离子渗氮可以大幅度改善挤压模具钢的高温耐磨性。
- And according to chemical dynamics principle and internal diffusion theory, the non brittle rapid nitriding is developed.
依据化学动力学原理和内扩散理论，研制成功了无脆性快速气体渗氮新工艺。
- Process of nitriding and nitrocarburizing of iron and steel
钢铁的渗氮和碳氮共渗工艺
- The experimental results of computer-controlled without white layer soft nitriding of steel W18Cr4V have been analyzed and discussed.
分析讨论了W18Cr4V钢无白层微机控制软氮化的试验结果。
- Reducing discharge interval and increasing electric field intensity could increase the hardness and depth of nitriding layer markedly.
在本工艺条件下，适当减小放电间隙，增大电场强度，可以明显提高渗层的硬度和深度。
- The gas nitriding technology of H13 steel was studied by an orthogonal test.
运用正交试验法，研究H13钢气体渗氮工艺。
- The structure and magnetic field feature of seal motor used in nitriding furnace is analyzed, and the mathematical model for the magnetic field is set up.
对氮化炉用密封电机的结构、磁场特点进行了分析，并建立了磁场的数学模型。
- Study of Process Characteristics and Nitrided Layer Properties of Vacuum Nitriding
真空渗氮工艺特性及渗氮层性能研究
- Application of ion sputtering in plasma nitriding of austenitic stainless steel
离子溅射在奥氏体不锈钢离子渗氮中的应用
- Glow-discharge nitriding treatments of 1Cr18Ni9Ti austenitic stainless steel were performed at different temperature conditions. Surface morphologies, microstructures, properties of the nitrided layers were investigated.
对1Cr18Ni9Ti奥氏体不锈钢进行了不同温度条件的离子渗氮处理，系统研究了经渗氮处理后改性层的表面形貌、微观结构和性能等。
- The Effect of Cermet Additive on Nitriding and Chromeplating Cylinder Liners
陶瓷润滑油添加剂对渗氮和镀铬缸套作用效果的研究
- Various conventional heat treatment furnaces, atmosphere furnaces, vacuum furnaces, fluidized-beds, ionic nitriding equipment, etc.
各种常规热处理炉及气氛炉、真空炉、流态床、离子渗氮设备等；
- DC-pulsed plasma nitriding has been developed into an important technique for strengthening metallic materials.
脉冲直流等离子渗氮处理已成为金属材料表面强化的重要方法。
- If nitrided, then nitriding depth should not too deep otherwise increased thermal cracking may occur.
如需氮化，则氮化深度不宜过深，否则容易出现增强的热裂。
- Spalling was a major form of contact fatigue failures in nitriding steel.
氮化钢的主要接触疲劳破坏形式是剥落。
- To use stress corrosion test method to study the action of J55 nitriding casing under different test conditions and compare the anti-corrosion with non-nitriding casing.
用应力腐蚀试验方法研究了J55钢渗氮套管在不同试验条件下的行为，并和未渗氮套管的抗腐蚀性进行了比较。
- Oxidising after nitriding, the abrasion resistence and the corrosion resistence of the nitriding layer can be further improved;
渗氮后添加可提高氮化层的耐磨性、耐蚀性；
- Study of Solid Solution Nitriding of Austenitic Stainless Steels
奥氏体不锈钢固溶渗氮研究
- Effect of Laser Gas Nitriding for Biological Activities on NiTi Alloy
NiTi合金激光气体氮化对其生物活性的影响
百科解释
网络意思
窒化
氮化
氮化法
氮化处理